Revision 3
• Avoid personal injury. Use a chain hoist, or get assistance, when lifting components that
weigh
50 lb. (23
kg)
or more. Make sure all lifting devices (chains, hooks, or slings) are
in good condition and are
of
the correct capacity. Make sure hooks are positioned
correctly. Always use a spreader bar when necessary. The lifting hooks
must
not
be
side loaded.
•
To
avoid bums, be alert for hot parts on components that have just been turned off.
•
Always
use tools that are in good condition. Make sure you understand how
to
use them
before performing any preventive maintenance work.
• Use ONLY genuine NLB replacement parts.
• Do
not
make any unauthorized alterations
to
the equipment or components.
• Do
not
attempt pressurization
of
the power end with dry gas to exclude contaminants
without a special oil level indicator. With a standard indicator, all oil will be lost
through the vent hole in the top
of
the indicator.
• Adhere to the preventive maintenance intervals
to
ensure proper operation
of
high
pressurewater jetting unit.
© Copyright August, 2000 NLB Corporation
5-5
To Next Page
Loading...