Revision 3
Figure 5-6. Turn
pump
suction elbow upwards.
d.
Start the diesel engine and engage the power take off. Start pouring coolant into the
vertical pipe
(Figure 5-7).
Figure
5-7.
Pour antifreeze solution in vertical pipe.
e.
Keep pouring coolant until the color
of
the discharge from the pump matches the color
of
the new coolant. This indicates that the coolant is in the high pressure pump and
piping.
f. The high pressure water jetting unit is now safe to store indefinitely where temperatures
reach
0° F (-18 °
C).
g.
The coolant solution in the diesel engine's radiator should be checked
at
regular
intervals to assure that the engine does not freeze up. Add coolant
as
needed.
© Copyright August, 2000 NLB Corporation
5-22
To Next Page
Loading...