Nokia 8210 - Page 72

AT Command Set for Nokia 8210 71
Copyright © 2000. Nokia Mobile Phones. All rights reserved.
PN-3131 Result Codes
In-Band Events From DCE to DTE
The following <dle> shielded codes can be sent by DCE when in class 8 mode
(+FCLASS=8). At least some of these events are required if binary voice data is
transferred through AT command interface. Other events of PN-3131 are not
applicable to GSM.
event code description state FBUS interaction
3
R ring command call_coming(mode)
6 c facsmile calling command call_coming(bc)
7 e data calling command call_coming(bc)
9 s presumed hang-up receive call_clear_indication
10 q presumed end of message receive call_clear_indication
18 r ringback command call_remote_alerting
19 b busy command call_clear_indication(cause)
- <dle> single <dle> in data receive -
- <sub> <dle><dle> in data receive -
- <etx> end data state receive -
(PN-3131 sections 5.2 and 7.3).