Nokia ONT - Page 130

Configure
a
G-2426G-B indoor
ONT
Network configuration
Configuring Wireless 2.4GHz
NokiaONT
3FE-49441-ABAA-TCZZA
June
2021
Issue 1
130
Table 8-16 Wireless (2.4GHz) parameters (continued)
Field Description
Encryption Mode Select an encryption mode from the list:
• OPEN
• WEP
• WPA/WPA2 Personal
• WPA/WPA2 Enterprise
• WPA2/WPA3 Personal
• WPA3 Personal
WPA Version Select a WPA version from the list:
• WPA2
• WPA/WPA2
• WPA3
• WPA2/WPA3
WPA Encryption Mode Select a WPA encryption mode from the list:
• AES
• TKIP/AES
WPA Key Enter the WPA key.
Enable WPS Enable or disable WPS from this list following the instructions in Step 3.
WPS Mode Select a WPS mode from the list: PBC (Push Button Connect) or STA PIN (Personal Identification Number)
or AP PIN (Access Point Personal Identification Number)
Domain Grouping This option is only available for the generic Operator ID MSNA and for some customer-specific Operator IDs.
Select this checkbox to enable the coexistence of multiple isolated home LAN/WLAN routing domains.
Selecting this check box also displays all of the text associated with this field in the table.
Domain Name Select a domain name from the list, or select this checkbox to create one new domain. Only one domain
name can be configured.
Enter Domain Name Enter the domain name.
WAN Interface Select a WAN interface from the list.
Number of IP Select the number of IP addresses from the list; the default is 24.
LAN List Select a checkbox to enable the LAN: LAN1, LAN2, LAN3, or LAN4.
3
By default the WPS is enabled in SSID1, if you want to enable it in a different SSID, disable it
first from SSID1
1. Go to the SSID1, and in the field Enable WPS select Disable.
2. Return to the SSID of your choice and in the field Enable WPS select Enable.
3. Save your configuration.
4. Click WPS Connect.