Nokia ONT - Configuring DDNS; Table 8-37 Port Triggering Parameters

Configure
a
G
-
2426G
-
B
indoor
ONT
Configuring the Application
Configuring DDNS
Nokia
ONT
3FE-49441-ABAA-TCZZA
June
2021
Issue 1
172
Table 8-37 Port Triggering parameters
Field Description
Application Name Select an application name from the list.
The default is Custom settings.
Open Port Enter the open port range.
Triggering Port Enter the triggering port range.
Expire Time Enter the expiration time in seconds.
Open Protocol Select the open port protocol from the list:
• TCP
• UDP
• TCP/UDP
Trigger Protocol Select the triggering port protocol from the list:
• TCP
• UDP
• TCP/UDP
Enable Triggering Select this checkbox to enable port triggering.
WAN Connection List Select a WAN connection from the list.
Note: Only active devices are shown on this list.
3
Click Add.
E
ND OF STEPS
8.42 Configuring DDNS
1
Click Application→DDNS from the left pane in the GPON Home Gateway page. The DDNS
page displays.