Network configuration
Configuring Wireless 5GHz
3FE-49441-ABAA-TCZZA
Issue 1
Table 8-17 Wireless (5GHz) parameters
Field Description
Enable Select this checkbox to enable Wi-Fi.
Bandwidth Select from:
• 20 MHz
• 40 MHz
• 80 MHz
Channel Select a channel from the list or select Auto to have the channel automatically assigned.
Transmitting Power Select a percentage for the transmitting power from the list:
• Low (25%)
• Medium (50%)
• High (75%)
• Maximum (100%)
WMM Select Enable or Disable from the list to enable or disable Wi-Fi multimedia.
Enable MU -MIMO Select Enable or Disable from the list to enable or disable MU-MIMO.
Total MAX Users Enter the total number of MAX users.
SSID Configuration
SSID Select Select the SSID from the list.
SSID Name Change the name of the selected SSID.
Enable SSID Select Enable or Disable from this list.
SSID Broadcast Select Enable or Disable SSID broadcast from this list.
Port Mode Select a port mode from the list. Route is the default.
Isolation Select Enable or Disable from this list.
MAX Users Enter the number of MAX users.
Encryption Mode Select an encryption mode from the list:
• WPA/WPA2 Enterprise
• WPA2-AES
• WPA2+WPA
WPA Key Enter the WPA key.
Enable WPS Select enable or disable WPS from the list following the instructions in Step 3.
WPS Mode Select a WPS mode from the list: PBC (Push Button Connect) or STA PIN (Personal Identification
Number) or AP PIN (Access Point Personal Identification Number)
Domain Grouping
Domain Grouping This option is only available for the generic Operator ID MSNA and for some customer-specific Operator
IDs. Select this check box to enable the coexistence of multiple isolated home LAN/WLAN routing
domains. Selecting this check box also displays all of the text associated with this field in the table.
Domain Name Select a domain name from the list.