RG Troubleshooting Counters
Viewing Residential Gateway (RG) troubleshooting counters
3FE-49441-ABAA-TCZZA
Issue 1
Figure 8-63 RG Troubleshooting Counters page
2
Configure the following parameters:
Table 8-46 RG Troubleshooting Counters parameters
Field Description
WAN Connection List Select a WAN connection from the list.
US Throughput This test is used to determine the upstream throughput/speed.
Click US Speed Test to specify the time for the upstream test.
The default is weekly, performed at idle to a public server.
DS Throughput This test is used to determine the downstream throughput/speed.
Click DS Speed Test to specify the time for the downstream test.
The default is weekly, performed at idle to a public server.
US Packet Loss Displays the number of upstream packages lost.
DS Packet Loss Displays the number of downstream packages lost.
Internet Status Indicates whether the broadband connections is active (UP) or not (DOWN).