Nokia RM-506 - Quick Test Window

Figure 31 CW Test window
Quick Test window
Because the Quick Test runs the Receiver Self Test before the Oscillator Test , it may cause a timeout on the
Oscillator Test . It does not necessarily mean that Oscillator Test has failed, but carrying out the Oscillator
Test (page 3–45), Receiver Self Test (page 3–46) and CW Test (page 3–47) individually will give more valid
results.
RM-505; RM-506
BB Troubleshooting and Manual Tuning Guide
Page 3 –48 COMPANY CONFIDENTIAL Issue 1
Copyright © 2009 Nokia. All rights reserved.