FMTx 2.1 schematic
Figure 52 FMTx 2.1 schematic
The handset uses an antenna that is integral to the C-cover.
The loop antenna requires two connection points, J2158 and X2159 (the signal and the ground). It is
important to check these connection points for damage or dirt since the performance of the FMTx 2.1
implementation will be severely impaired if these connections are not in good condition.
FMTx 2.1 component layout
Figure 53 FMTx 2.1 Component References and Location
RM-505; RM-506
FMTx 2.1 Troubleshooting
Issue 1 COMPANY CONFIDENTIAL Page 7 –5
Copyright © 2009 Nokia. All rights reserved.
To Next Page
Loading...
