4
5
1 2
3
6
ProBlue Fulfill Integrated Fill System
21
Part 1101094_02
E 2012 Nordson Corporation
Clearing a Refill Alarm
NOTE: When the refill alarm output is activated, the melter heaters stay on
and the melter ready remote output remains active.
1. Press the Fill System Enable key (4) to disable the fill system and
alarm.
2. Correct the fault condition.
3. Press the Clear/Reset key (5).
4. Press the Fill System Enable key (4) to re-enable the fill system.
NOTE: It may take up to 30 seconds for the reset command to take effect.
1. Melter fault light (red)
2. Melter ready light (green)
3. Refill alarm LED (red)
4. Fill system enable key
5. Clear/reset key
6. Enter key
To Next Page
Loading...
