Nordson ProBlue Fulfill - System Overview and Theory; Theory of Operation; Modes of Operation; Installation and Setup

Table of Contents
i
Part 1101094_02
E 2012 Nordson Corporation
Table of Contents
Manual Coverage 1............................................
Safety 1......................................................
Getting Started 1...............................................
Restrictions to System Use 2....................................
Description 2.................................................
Intended Use 3................................................
Unintended Use 3..............................................
Melter Firmware Requirements 3.................................
Theory of Operation 3...........................................
Modes of Operation 4...........................................
Overview of Pneumatic and Mechanical Components 5..............
(A). Adhesive Transfer Hose 5.................................
(B). Adhesive Storage Bin 5...................................
(C). Filter Housing and Lid Assembly 6..........................
(D). Air Pressure Regulator/Solenoid Assembly 6.................
(E). Suction Lance 6.........................................
Overview of Electrical Components 7.............................
(F). Control Panel 7..........................................
Refill Board 8...............................................
Level Sensor 8..............................................
Installation 10.................................................
Installation Clearances 10........................................
Installation Components 12.......................................
Assemble the Lid Components 13.................................
Assemble the Transfer Hose, Air Line, and Suction Lance 14..........
Set Up the Fill System 16.........................................
Test the Fill System 18...........................................
Remove the Inlet Air Deflector (Optional) 19.........................
Operation 20...................................................
Monitoring Refill Operation 20.....................................
Clearing a Refill Alarm 21.........................................