ProBlue Fulfill Integrated Fill System
2
Part 1101094_02
E 2012 Nordson Corporation
Restrictions to System Use
Before installing the fill system, ensure that your application DOES NOT
require:
S the transfer of solid-formed adhesive material greater than 12 mm
across the largest dimension.
S adhesive temperatures exceeding 205 _C (400 _F).
Description
The Fulfill system extends proven ProBlue adhesive melter technology by
providing automatic delivery of solid-formed adhesive to the melter tank.
For a complete ProBlue Fulfill integrated fill system, both the melter and an
installation kit must be ordered.
Figure 1 ProBlue Fulfill melter (installation kit not shown)
To Next Page
Loading...
