Melter control switch (on/off)
Operation
4-29
Part 1024496_06
2014 Nordson Corporation
Shutting Down the Melter
Shut down the melter when it will not be used for an extended period of time.
To shut the melter down
1. Switch the melter off.
The automatic pressure discharge (APD) valve relieves the hydraulic
pressure in the manifold back to the tank.
2. Disable the guns as follows:
Air‐operated guns: Turn off the air supply to the guns.
Electric guns: Turn off the gun driver, pattern controller, or timer.
To Next Page
Loading...
