Nordson ProBlue P10 - Input Data

Installation
3-43
Part 1024496_06
 2014 Nordson Corporation
Table 3‐8 Input Data
Input Terminals Operating Parameter Control Option Note
Standard Inputs
1 8 and 9 30
0 ‐ Input Disabled
1 ‐ Standby On/Off
2 ‐ Heaters On/Off
3 ‐ Pump Enable/Disable
4 ‐ Hose/Gun 1 Enable/Disable
5 ‐ Hose/Gun 2 Enable/Disable
6 ‐ Hose/Gun 3 Enable/Disable
7 ‐ Hose/Gun 4 Enable/Disable
8 ‐ Hose/Gun 5 Enable/Disable
9 ‐ Hose/Gun 6 Enable/Disable
10 – Automatic standby (Default)
A, B
C
F
D
2 10 and 11 31
0 ‐ Input Disabled
1 ‐ Standby On/Off (Default)
2 ‐ Heaters On/Off
3 ‐ Pump Enable/Disable
4 ‐ Hose/Gun 1 Enable/Disable
5 ‐ Hose/Gun 2 Enable/Disable
6 ‐ Hose/Gun 3 Enable/Disable
7 ‐ Hose/Gun 4 Enable/Disable
8 ‐ Hose/Gun 5 Enable/Disable
9 ‐ Hose/Gun 6 Enable/Disable
F
3 12 and 13 32 Same as parameter 31 (Default=2)
4 7 and 14 33 Same as parameter 31 (Default=4)
Optional Inputs
5 11 and 12 34 0 (Disabled) E
6 13 and 14 35 0 (Disabled) E
7 15 and 16 36 0 (Disabled) E
8 17 and 18 37 0 (Disabled) E
9 19 and 20 38 0 (Disabled) E
10 9 and 10 39 0 (Disabled) E
NOTE A: Parameter 30 has 10 control options. parameters 31, 32, and 33 each have only 9 control options.
B: Parameters 34 through 39 are reserved for the six inputs created when the optional I/O expansion card is installed.
The six optional inputs have the same control options as parameter 31.
C: If control option 3 is selected, the pump will not turn on—even if you press the pump key—if voltage is not present on
the input’s contacts.
D: If control option 10 is selected for input 1, a time must be set in parameter 24.
E: Refer to the instruction sheet provided with the optional I/O expansion card for wiring information.
F: When the 8-Hose/Gun Expansion option is installed, the option for Hose/Gun 7 or 8 Enable/Disable
appear as options 15 and 16 respectively.