400/480 Volt ProBlue Adhesive Melters
E-2
Part 1024496_06
2014 Nordson Corporation
Introduction
Safety
Before installing or operating the transformer or melter, read the safety
information provided in Section 1, Safety.
Intended Use
The 1.5 kVA and 3.0 kVA transformers can only be used with ProBlue
adhesive melters that are specifically designed for 400/480 volt electrical
service.
Use an input electrical service rated at 400 volts 3‐phase without a
neutral or 480 volts 3‐phase without a neutral.
Unintended Use
Water wash‐down environments
Explosive atmospheres
To Next Page
Loading...
