Nordson ProBlue P10 - Location of Safety Labels and Tags; ‐2 General Safety Warnings and Cautions; Safety Labels and Tags

Safety
1-11
 2014 Nordson Corporation
Issued 10-11
Safety Labels and Tags
Figure 1‐1 illustrates the location of the product safety labels and tags affixed
to the equipment. Table 1‐2 provides an illustration of the hazard
identification symbols that appear on each safety label and tag, the meaning
of the symbol, or the exact wording of any safety message.
The installation kit provided with the melter may contain label overlays that
are printed in a variety of languages. If required by governing safety
regulations, apply the appropriate overlay to the text portion of the labels
shown in Figure 1‐1.
2
1
5
4
3
Figure 1‐1 Location of safety labels and tags
Table 1‐2 General Safety Warnings and Cautions
Item Description
1
WARNING
Burn hazard.
Hot adhesive.
Release pressure before servicing.
2
CAUTION
Burn Hazard. Hot Surfaces.
3
WARNING
Burn hazard.
Hot adhesive.
Release pressure before servicing.
4
WARNING
Hazardous voltage.
Disconnect all power supply connections before servicing.
5
Symbol means: Hot Surface! Do not touch.