Operating Parameters
B-1
Part 1024496_06
2014 Nordson Corporation
Appendix B
Operating Parameters
Operating parameters are organized in this appendix according to the logical
groups listed in Table B‐1. For information about selecting and editing
operating parameters, refer to Section 3, Installation, Setting Up the Melter.
NOTE: Parameter numbers that are reserved or that are not used do not
appear in this appendix.
Table B‐1 Parameter Groups
Group
Parameter
s
Description
Standard 0 to 11 and 14 Frequently used parameters
Temperature Control 20 to 26 Control heater function
Input Setup 30 to 39 Configure the standard and optional inputs
Output Setup 40 to 46
Configure the standard and optional out-
puts
Seven-day Clock 50 to 77 Configure the clock feature
To Next Page
Loading...
