Description
2-1
Part 1024496_06
2014 Nordson Corporation
Section 2
Description
This manual describes the installation and use of the ProBlue 4 (P4),
ProBlue 7 (P7), and ProBlue 10 (P10) adhesive melter. When necessary, the
reader is referred to the documentation supplied with other Nordson products
or products supplied by third parties.
With the exception of tank capacity, hose/gun capacity, and exterior
appearance, all ProBlue melters are functionally identical. To simplify the
presentation of information in this manual, depictions of the model P4 are
used generically throughout this manual to represent all ProBlue melters.
To Next Page
Loading...
