Troubleshooting
6-36
Part 1024496_06
2014 Nordson Corporation
Continued from previous page....
The melter is in the standby
mode.
Refer to Section 4, Standby
Key.
+
−
Is the standby LED on?
+
−
Is the ready delay counting
down?
Wait for the ready delay to
count down.
Refer to Appendix B, parameter
4.
Confirm that the tank heater
has failed and replace the tank.
Tank − P/N 1018379.
Refer to DP.5.
Starting conditions:
No faults >
Ready LED is not illuminated
T.3
To Next Page
Loading...
