Nordson Ultimus V - Communications Port Options Screen; Contrast Control; Information Screen

Communications Port Options Screen
• The Comm Port Settings screen allows the user to select which
RS-232 port is active. The firmware will not allow both ports to
be enabled at the same time.
• Pressing the Enter key when Baud Rate is selected will display
the Baud Rate selection screen.
• Pressing the F2 (Save) key will store the communications port
settings.
Contrast Control
• The LCD contrast can be adjusted from 0 to 63 levels. As the
contrast ratio is adjusted up or down, the LCD will automatically
adjust to the new ratio.
• The Easy Adjust buttons {Plus (+) / Minus (-) arrow keys} will
increase or decrease the LCD contrast ratio. The F2 (Save) key
will store the LCD Contrast settings.
Information Screen
• The information screen displays the SAP part number for the
dispenser and the name UltimusV. The Technical Support phone
number and web address are also displayed.
• VER: is the version number of the Main board firmware.
Ultimus V High Precision Fluid Dispenser
26 www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.