Nordson Ultimus V - Memory Location Read Command

2.6.3.3 Pressure Time Vacuum Read Command (continued)
The above text packet in hexadecimal format:
STX 1 5 D 0 P D 0 5 0 0 D T 1
0x02 0x31 0x35 0x44 0x30 0x50 0x44 0x30 0x35 0x30 0x30 0x44 0x54 0x31
0 0 5 5 V C 0 1 0 0 E 0 ETX
0x30 0x30 0x35 0x35 0x56 0x43 0x30 0x31 0x30 0x30 0x45 0x30 0x03
2.6.3.4 Memory Location Read Command
This command returns the current memory location at which the dispenser is set. “D0” is the letter “D” followed by
the digit “0.”
Client command and data: (STX) + 04 + UA-- + C6 + (ETX)
The above text packet in hexadecimal format:
STX 0 4 U A space space C 6 ETX
0x02 0x30 0x34 0x55 0x41 0x20 0x20 0x43 0x36 0x03
Return Format: D0ccc
ccc: The 3-digit memory location from 0–399.
EXAMPLE: If the current memory location is 001, the text packet received from the dispenser is:
(STX) + 05 + D0001 + 96 + (ETX)
The above text packet in hexadecimal format:
STX 0 5 D 0 0 0 1 9 6 ETX
0x02 0x30 0x35 0x44 0x30 0x30 0x30 0x31 0x39 0x36 0x03
Appendix B — RS‑232 Protocol (continued)
Ultimus V High Precision Fluid Dispenser
66 www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.