Nordson Ultimus V

To Next Page

To Previous Page

Notes

Ultimus V High Precision Fluid Dispenser

85www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.

Main Page

Table of Contents3
Contents3
Nordson EFD Product Safety Statement6
Halogenated Hydrocarbon Solvent Hazards7
High Pressure Fluids7
Qualified Personnel7
Intended Use8
Regulations and Approvals8
Personal Safety8
Fire Safety9
Preventive Maintenance9
Important Disposable Component Safety Information10
Action in the Event of a Malfunction10
Disposal10
Specifications11
Ultimus V Features12
Unpacking the Dispenser13
Features and Controls14
Front Panel14
Back Panel15
Initial Setup for Testing16
Connect Power16
Connect Foot Pedal16
Connect Air Input16
Connect Air Output16
Attach Syringe Barrel and Tip16
Dispensing System Setup17
Using Steady Mode to Dispense a Dot or Stripe or Fill a Cavity17
Using Timed Mode to Make Repeatable Deposits18
Using the Vacuum Control Feature for Low Viscosity Fluids18
Filling the Syringe Barrel19
Initial Settings20
Basic Menu Operation21
Setting the Real Time Clock21
Setting the Date21
Setting Units of Pressure22
Setting Units of Vacuum22
Setting Language22
General Operator Lockout Procedures23
Setting a New Password24
Clearing a Password24
Alarm Options Screen24
Communications Port Options Screen26
Contrast Control26
Information Screen26
Setting Dispense Time, Pressure, and Vacuum27
Dispense Modes27
Timed Mode27
Teach Mode27
Steady Mode28
Setting Pressure28
Setting Vacuum28
Using Auto Increment Mode29
Dispense Count Mode30
Time Mode30
Auto Sequence Mode30
Sample Memory Cell Settings31
Part Numbers32
Accessories32
Replacement Parts32
Ultimus V32
Optimeter34
Appendix A - I/O Connector Pin Descriptions35
Appendix B - RS-232 Protocol39
Physical Connection39
RS-232 Pin Assignments39
Connection Examples40
Using a USB-To-RS-232 Converter40
Using a DB9-Female to DB9-Female-Straight-Through Cable40
RS-232 Protocol41
Communication Specifications41
Data Encoding42
Text Packet Format43
Stx43
Bytes43
Command43
Data43
Checksum44
Etx44
Text Packet Example45
Communication Sequence46
Write Text Packets46
Read Text Packets48
Communication Timeout50
RS-232 Commands50
Response Commands50
Success Command (A0)50
Failure Command (A2)50
Write Commands51
Memory Change Command51
Timed Mode Command51
Steady Mode Command51
Time / Steady Toggle Command51
Pressure Set Command52
Memory-Pressure Set Command52
Vacuum Set Command53
Memory-Vacuum Set Command53
Time Set Command54
Memory-Time Set Command54
Memory-Time-Pressure-Vacuum Set Command55
Pressure Units Set Command56
Vacuum Units Set Command56
Dispense Parameter Memory Clear56
Deposit Count Clear Command57
Reset Auto Increment Command57
Auto Increment Mode on / off Command57
Auto Increment Mode Command58
Set Start & End Address Command58
Set Trigger Value Command59
Set the Real Time Clock Command59
Set the Real Time Date Command60
Operator Lockout Set Command60
Set Language Command61
Alarm Options Set Command62
Reset Alarms Command62
Dispense Command62
Read Commands63
Pressure Time Read Command63
Memory Channel, Dispense Pressure, and Dispense Time Read Command64
Pressure Time Vacuum Read Command65
Memory Location Read Command66
Pressure Units Read Command67
Vacuum Units Read Command67
Total Status Read Command68
Trigger Value Read Command69
Deposit Count Read Command69
Real Time Clock Read Command70
Real Time Date Read Command71
Operator Lockout Read Command71
Alarm Options Read Command73
Alarm Status Read Command74
Troubleshooting Remote Communication75
No Response from the Dispenser75
Dispenser Returns a Failure Command (A2)76
Ultimus V Interactive Software77
Installation77
Opening the Software77
Connecting to the Dispenser78
Check the Communication Settings78
Connect79
Bulk Editing80
Labview Driver and Example Program81

Nordson Ultimus V - Page 85

Table of Contents

Related product manuals