Nortel CallPilot 150 - Chapter 7 Working with CCR Trees; Building a CCR Tree

63
CallPilot 150 Telephone Administration Guide
Chapter 7
Working with CCR Trees
Building a CCR Tree
To build a CCR Tree
1 Create the Home node. The Home node can be either a Menu node or an Information node.
If the Home node is an Information node:
• record an Information message
If the Home node is a Menu node:
• create the sub-nodes. The sub-nodes can be:
— Menu sub-nodes
— Information nodes
— Mailbox nodes
— Transfer nodes
2 Assign the CCR Tree to a Greeting Table.
You can assign a CCR Tree for each time of day.
3 Test the CCR Tree
Note: To minimize the potential of service disruptions, avoid working on CCR
Trees during periods of peak activity. Callers can experience answering delays
while you are working on a CCR Tree.