86 Chapter 8 Broadcast and Information messages
P0919416 03
To record and send a Broadcast message - CallPilot
5 Press PLAY
to listen to your Broadcast message before sending it
or
press OK
to accept your recording
or
to press RETRY
to re-record your Broadcast message.
Your message is delivered to all initialized mailboxes
or
press ® or • to cancel sending the Broadcast message.
6 Press ® to end the session.
1 Press
≤·°⁄.
2 Enter the System Administrator mailbox number and
press OK
or £.
3 Enter the System Administrator mailbox password and
press OK
or £.
A mailbox summary is announced.
4 Press COMP
or ‡fi to enter the Compose Message option.
5 Enter the Broadcast message address and press OK
or £.
·‚‚ is the default Broadcast message address.
The Broadcast message address changes if you change the
Group List leading digit.
6 Press REC
or fi and record the Broadcast message at the tone.
7 Press OK
or £ to end your recording
or
press REREC
to erase and re-record the Broadcast message.
8 Press PLAY
or ¤ to listen to your message
or
press SEND
or ‡· to send the Broadcast message
or
press DEL
or ‡fl to erase and re-record the Broadcast
message.
9 Press ® to end the session.
Accept rec?
RETRY PLAY OK
Mbox:
RETRY OK
Pswd:
RETRY OK
To:
NAME SPEC DONE
EMPTY
REC
Recording...
REREC OK
Rec stopped
PLAY DEL SEND
To Next Page
Loading...
