Nortel T7316 Quick Programming Guide

28
Call Forward on Busy
You can programme your extension to forward a call to a different extension if you are
engaged at your station or if you have Do Not Disturb activated.
ACTION VISUAL DISPLAY
1. Begin the session by following the instructions under "To begin
a programming session" on page 9, and by using the System
Administrator Plus password.
Terminals&Extns
2. Press
≠.
Show extn#:__
3. Enter the number of the extension you wish to programme
(234 represents the number of the extension you have chosen to
programme)
234:234
COPY FIND
4. Press
≠.
Line access
COPY
5. Press
‘
.
Capabilities
COPY
6. Press
≠.
Fwd no answer
7. Press
‘
.
Fwd on busy ....
8. Press
≠.
Fwd to:None
CHANGE
9. Press
CHANGE
Fwd to:__
CANCL
10. Use the keypad to enter the extension to which you want the
calls sent. (Extension 221 in this example.)
Fwd to:2__
CANCL BKSP
11. When you have entered all the digits, the display shows:
Fwd to:221
CLR CHAN GE
12. Press
® to exit the session.
End of session
13. After a few seconds, the date and time reappear on the display.
1 Jan 1:00 am

Nortel T7316 Specifications

General

Type	Digital telephone
Buttons	24 programmable buttons
Speakerphone	Yes
Headset Jack	Yes
Wall Mountable	Yes
Speed Dial	Yes
Conference	Yes
Volume Control	Yes
Display	2-line LCD
Expansion	Supports Key Expansion Modules
Compatibility	Nortel Meridian PBX systems
Features	Hold, Redial
Lines	Supports multiple lines