Nortel T7316 Quick Programming Guide

5
SECTION 1
Getting Started
TELEPHONE PROGRAMMING BUTTONS
You will note that your Business Series Terminal (BST) has different icons on the keycaps than the
Norstar telephones. This table shows how the icons compare between the telephones.
The Norstar Modular Plus Quick Programming Guide is a quick reference when you need information
about some of the more commonly-used features on this system.
For more detailed information, refer to the System Administration Guide. It contains everything needed
to gain access to and to programme the many features of the system.
PROGRAMMING OVERLAYS
Before you begin programming, you need to prepare the system. Start by placing the programming
overlay over the appropriate keys on your programming set, as shown in the diagrams below.
The T7316E, shown below, and the T7316 are the Business Series Terminals that can be used for
programming.
Button Name
Business Series Terminals
T7000, T7100, T7208, T7316,
T7316E
M7000, M7100N, M7208N,
M7310N, M7324N
Feature ≤ ƒ or ƒ
Handsfree
Mute
Bottom right button.(T7208)
Mute: (T7316/T7316E)
Handsfree: (T7316E)
©
Hold ≥˙
≥(T7000)
˙or ˙
≥(M7000)
Release ® ® or ™
Business
Series
Terminal
Programming
overlay
Heading
Back
Show
Next
Heading
Back
Show
Next
T7316E
programming
buttons
T7316
programming
buttons

Nortel T7316 Specifications

General

Type	Digital telephone
Buttons	24 programmable buttons
Speakerphone	Yes
Headset Jack	Yes
Wall Mountable	Yes
Speed Dial	Yes
Conference	Yes
Volume Control	Yes
Display	2-line LCD
Expansion	Supports Key Expansion Modules
Compatibility	Nortel Meridian PBX systems
Features	Hold, Redial
Lines	Supports multiple lines