Nortel T7316 Quick Programming Guide

9
To begin a programming session
BASIC PASSWORD
This allows routine programming of individual extensions.
SYSTEM ADMINISTRATOR PASSWORD
This allows access to most of the settings for administration programming.
Using either of the passwords described above, you can programme the system beginning with “Terminal
and Extensions” (Terminals&Extns). Press
‘
repeatedly to scroll through programme options
including:
•Terminal&Extns
•Lines
• Services
• Sys Speed Dial
• Passwords
• Time & Date
• System prgrming
ACTION VISUAL DISPLAY
1. Place the programming overlay over the appropriate buttons on
your programming telephone (refer to "PROGRAMMING
OVERLAYS" on page 5).
1 Jan 1:00 am
2. Press
≤. Feature:
3. To programme the TIME code (time and date), enter
••°›fl‹ (the TIME code), followed by
¤¤‡›¤
. Using this example, the display shows:
Hour: 12:00
NEXT
CHANGE
ACTION VISUAL DISPLAY
1. Place the programming overlay over the appropriate buttons on
your programming telephone (refer to "PROGRAMMING
OVERLAYS" on page 5).
1 Jan 1:00 am
2. Press
≤. Feature:
3. Using the keypad, enter the System Access code:
••¤flfl‹››.
Password:
RETRY
4. Enter your password:
¤‹fl›fl.
Press
RETRY
if you enter the password incorrectly.
Terminals&Extns

Nortel T7316 Specifications

General

Type	Digital telephone
Buttons	24 programmable buttons
Speakerphone	Yes
Headset Jack	Yes
Wall Mountable	Yes
Speed Dial	Yes
Conference	Yes
Volume Control	Yes
Display	2-line LCD
Expansion	Supports Key Expansion Modules
Compatibility	Nortel Meridian PBX systems
Features	Hold, Redial
Lines	Supports multiple lines