8.10 Main Menu
The main menu on-screen display provides a gateway to the sub menu system.
›
Picture allows access to colorimetry and brightness parameters in many ways, both individual color
control as well as common controls.
Source controls which video signal source is active. Source can be DVI-1, DVI-2 or DVI-1&2 (Dual Head),
HDMI or DP (DisplayPort).
Install is used for setting up network connections, image orientation, illumination and other installation
related tasks. It also provides access to the service and diagnostic sub menus.
Status provides information about the connected video source. It also provides product serial number,
part number and SW revision details.
Night vision (optional) allows control of the invisible (IR) and visible (RGB) illumination for
dusk/night/dawn emulation.
3D settings are used for configuring Active 3D (i.e. Active Shutter Glasses enabled 3D). The supported
3D format is Dual Head via DVI-1&2 Connectors (one DVI cable provides left eye video information,
whilst the other DVI cable provides right eye video information).
8.10.1 Picture Menu
Contrast and Brightness can be adjusted from 0 to 100. The default value is 50.
Gamma is a transfer-function between the input signal from the source and the image displayed,
considering the non-linearity of human eye’s perception of light and color. Gamma can be selected to be
2.0, 2.2, 2.4, Linear or MaxBright to match the requirements of the source material. The default gamma
is 2.2.
To Next Page
Loading...
