norxe P1 - Environmental Standards; Mtbf; Safety Approvals; Radio Interference Approvals

© All Rights Reserved
www.norxe.com
P1 User Guide
Page 38 of 40
13.4 Environmental Standards
The projector is tested according to the following international standards.
STANDARD
#
DESCRIPTION
IEC
60068-1
General and guidance
IEC
60068-2-6
Vibration sinus
IEC
60068-2-27
Shock
IEC
60068-2-29
Bump
IEC
60068-2-32
Drop freefall
IEC
60068-2-64
Random vibration
13.5 MTBF
The MTBF (Mean Time Between Failure) is calculated according to Mil. Std. MIL-HDBAK-217, based on
component MTBF data, considering load, stress and maximum operating temperature.
PARAMETER
MIN.
TYP.
MAX.
UNIT
COMMENT
MTBF
-
116,000
-
Hrs.
MIL-HDBAK-217
13.6 Safety Approvals
The projector is approved according to the following international standards. Additional national approvals
apply according to the markings on the projector. The approval agency is NEMKO.
STANDARD
#
DESCRIPTION
IEC
60950-1:2005
(2. Edition) +
Am 1:2009 +
Am 2:2013
Information technology equipment – Safety – General requirements
13.7 Radio Interference Approvals
The projector is approved according to the following international standards. Additional national approvals
apply according to the markings on the projector. Approval agency is APPLICA (former DNV).
STANDARD
#
DESCRIPTION
CISPR
35, ed.1:2016
Electromagnetic compatibility (EMC), part 6-4, Generic Standards –
Emission standard for industrial environments
EN
55032,
ed.1:2012
Information technology equipment – Radio disturbance characteristics –
Limits and methods of measurement