8.11 Lens Options
A range of interchangeable projection lens options is available separately. Specifying the correct lens option for
the intended application is the responsibility of the partner / system integrator / end user. Please refer to the
manufacturers website or contact your dealer for further information about available lens options.
Focus, zoom (where applicable) & iris on all lens options are motorized. Stepper motors are used throughout to
ensure high degree positional accuracy.
Lens options comprise all glass, aspherical, no doublet optical elements & include ‘lens lock’ technology. The
‘lens lock’ feature allows the end user to physically lock the lens to the projector body, lock the lens adjustment
rings into position and lock the lens body to 3
rd
party supporting clamps for additional rigidity in extreme
circumstances.
Scheimpflug adjustment is a standard feature. This adjustment allows for fine-tuning of the projection lens along
the optical axis to achieve an even focus plane. Adjusting the Scheimpflug angle off-axis is possible in situations
where the projection surface is not normal to the optical axis.
To Next Page
Loading...
