NovaStar MX2000 Pro - Page 14

MX2000 LED Display Controller User Manual
www.novastar.tech
10
ST 2110
(25G)
2
primaries,
2 backups
1, -2) standards.
Backup
Support SMPTE 2022-7 standard.
Resolution
Max resolution:
4096×2160@60Hz/8192×1080@60Hz
Min resolution: 800×600@60Hz
Max height & width
Max width: 8192 (8192×1080@60Hz)
Max height: 8192 (1080×8192@60Hz)
Frame rate
23.98 / 24 / 25 / 29.97 / 30 / 47.95 / 48 / 50 / 59.94 / 60
/ 71.93 / 72 / 75 / 100 / 119.88 / 120 Hz
VMP control
Support loading video stream configuration by
SDP file or directly inputting.
Support setting the resolution when managing ST
2110 source in VMP.

Support preset resolutions up to 8192x1080@60Hz.

Allow for custom input resolutions.
NMOS management
NMOS discovery and control according to
standards IS-04 and IS-05.
Color gamut
Rec.709/DCI-P3/Rec.2020
IP address
IPv4 DHCP and static IP
Multicast protocol
IGMPv3, IGMPv2
Ethernet

25 GbE IEEE 802.3cc (25GBASE-LR)

25 GbE IEEE 802.3by (25GBASE-SR)
Optical transceiver
The ST 2110 card does not come with an optical
transceiver by default. Users need to purchase
one separately.

Only supports SFP28 (25GBASE-LR/SR/CR).

It is recommended to purchase the Accelink
25GBASE-LR 10km module.
Cables
OS1/OS2 optical fiber cables are recommended.

Transmission mode: single-mode duplex

Diameter: 9/125μm

Interface type: LC

Insertion loss: ≤0.3 dB