NSK Surgic Pro2 - Control Unit

9
Product Description
English
No� Key Name Display Function
Setting Key - Select the settings of the control unit, foot control or a
Bluetooth
®
connection� (See “8 – 1 Setting key”)
Enter Key -
Cancel Key -
LINK Key Press and hold this key for more than 2 seconds to switch
communication between VarioSurg 3 (option) and Osseo
100+(option) (only when it is connected)�
(See “5 – 5 Link function”)
: Connected
: Not connected, paired with VarioSurg 3
No display: Not connected
: Connected
: Not connected, paired with Osseo 100+
No display: Not connected
COOLANT Key Select the coolant solution flow level from 0 to 5�
LIGHT Key Select the light level� (OFF, LOW, HIGH)
- - -
Displays the current operating torque� (each bar means 10%)
: 100% : 50%
- - -
Displays the battery level of the foot control� Check the battery
level before and after treatment� Replace the batteries when the
display of battery level is flashing�
: 50-100%
: 10-50%
(flashing): Less than 10%
: 0%
- - -
Displays the status of connection with the foot control�
[]
: Connected
[]
(flashing): Not connected, paired with the
foot control
No display: Not connected
- - -
Displays the status of connection between an external terminal
and the control unit�
[
]
: Connected
[
]
: Not connected, paired with external terminal
No display: Not connected