22
Operation Procedure
5 – 5 Link function
Surgic Pro2 can be connected using Bluetooth to NSK VarioSurg 3 connected to the Link Module (option), Osseo 100+
(option), or an external terminal such as iPad�
1 3 42
1
Press and hold for 2 seconds or more to switch to setting mode, and “BLE SET” is displayed�
2
Press �
3
Press to select sub menu�
Foot control
Osseo 100+
VarioSurg 3
External terminal
See “8 – 1 – 1 Pairing with foot control”�
See “5 – 5 – 1 Osseo integration Monitoring Device (Osseo 100+)”�
See “5 – 5 – 2 Link Module”�
See “5 – 5 – 3 External terminal”�
Press
NOTICE
● Refer to the operation manual of the device to be connected for the use method and use environment�
● If pairing is not completed within 5 minutes, “NG” is displayed� If this happens, repeat pairing operation again
from step 1�
To Next Page
Loading...
