7
Product Description
English
Foot control
NOTICE
● The functions of the buttons of the foot control noted above are factory default settings� You can change the
setting as described in “8 – 1 – 2 Foot control button guidance”�
Left button
Select coolant solution flow level�
Press and hold for more than 2 seconds: Switching operation
between this product and linked device�
Center button
Program number change
Select a program number� Depressing for about two seconds
goes back one program�
Right button
Change direction of rotation
Press and hold for more than 2 seconds: Motor LED illumination
while button is depressed�
Speed control pedal
Battery cover
To Next Page
Loading...
