NSK Surgic Pro2 - Contra Angle Handpieces, Spare Parts and Optional Parts; Contra Angle Handpieces; Spare Parts List; Y-Connector

44
10 Contra Angle Handpieces, Spare Parts
and Optional Parts
10 – 1 Contra angle handpieces
Listed below are the contra angle handpieces that should be used with the Surgic Pro2 micromotor to guarantee torque
accuracy�
<Recommended handpieces>
Model Remarks
X-SG20L C1003 Optic surgical handpiece�
SG20 C1010 Non-optic surgical handpiece�
X-DSG20L C1068 Optic dismantling surgical handpiece�
X-DSG20 C1067 Non-optic dismantling surgical handpiece�
X-DSG20Lh C1076 Optic dismantling surgical handpiece with hexagon�
X-DSG20h C1075 Non-optic dismantling surgical handpiece with hexagon�
10 – 2 Spare parts list
Model Remarks
AC Power Cord U260414
Coolant Solution Hanger Post U370152
FC-81 Z1401001 Foot Control with Hanger
Battery Cover Z1401068 For Foot Control�
SGL80M Y1004211 Optic motor (with motor cord)
SG80M(2�0m) Y1004212 Non-optic motor (with motor cord)
Protection Plug 10001595
O-Ring D0312457102 For protection plug�
O-Ring D0312074080 For micromotor�
Tube Holder E1198105 For micromotor�
Tube Holder Y900083 Pack of 7
Calibration Bur Z1057101
Handpiece Stand Z1402110
Nozzle Holder 20000396 For X-SG20L�
Nozzle Holder 20000357 For SG20�
Internal Spray Nozzle 10000324 23mm
Cleaning Wire 20000512
E-Type Spray Nozzle Z019090
Y-Connector C823752 Used for branching the internal and external coolant irrigation�
Irrigation Tube Y900113 Pack of 5 for 2�0m motor�