NSK Surgic Pro2 - Implant System Setup and Operation Programming

36
Setting
8 – 1 – 2 Foot control button guidance
1 52, 4
3, 6
7
1
Press and hold for 2 seconds or more to switch
to setting mode�
2
Press to select “FC SET”�
3
Press �
4
Press to select “BUT SET”�
5
Press to change setting value� See
“<Setting values of foot control button>”�
6
Press � Press each time to select the
buttons to which functions are assigned in the order
of Left button Center button Right button Left
button…�
7
Press twice to end setting mode�
<Factory settings>
Left Button Center Button Right Button
1 2 3