23
Operation Procedure
English
5 – 5 – 1 Osseo integration Monitoring Device (Osseo 100+)
The Osseo integration Monitoring Device, “Osseo 100+” measures the implant stability quotient (ISQ) contactlessly and
can be connected using Bluetooth, permitting ISQ confirmation over a shared interface�
The ISQ score measured by Osseo 100+ can be displayed on the control unit of Surgic Pro2�
See the Osseo 100+ manual for the method of use�
1
Press the operating key to turn on Osseo 100+�
2
Press and hold the operating key at least 3 seconds�
3
Confirm the “PA” is displayed�
4
Pairing is successful when Surgic Pro2 beeps and
displays “OK”�
Make sure
icon below is displayed and the device
is connected�
5
Press twice to end setting mode�
CAUTION
● If any abnormalities are found with Osseo 100+, refer to the Osseo 100+ operation manual�
● Do not use the ISQ value displayed on the Surgic Pro2 screen for diagnostic purposes� The value is displayed for
information only�
To Next Page
Loading...
