25
Operation Procedure
English
5 – 5 – 3 External terminal
By connecting the control unit to an external terminal (such as iPad) with a dedicated application installed, detailed
procedural data such as rotation speed and torque can be displayed in real time�
Procedural data can also be stored on the external terminal in PDF or CSV files�
See the operation manual in the application for how to use the application�
Download the dedicated application from the following�
www�nsk-dental�com/qr/app-surgicpro2
See “10 – 4 Compatible terminals” for compatible terminals�
1
Launch the App�
2
Touch the icon�
3
Touch “Start”�
4
Enter the code “123456” and touch “Pair”�
5
Pairing is successful when Surgic Pro2 beeps and
displays “OK”�
Make sure
icon below is displayed and the device
is connected�
6
Press twice to end setting mode�
CAUTION
● The data saved on the external terminal is for reference of operation history, do not use it for diagnostic
purposes�
To Next Page
Loading...
