4 - 36 en-938821/2
Notes
Error during programme execution
Display of a page similar to the example below:
AUTO
MODE
NC ??
1
2
N30 S900 M40 M03
----------------------------------------
>N40 G00 G41 X0 Y-20
>N50 Z-5 F2000
>N60 G01 Y80 EB20
>N70 G02 X0 Y118 R19
>N80 G01 X121 EB13 EF50
>N90 Y0 EB15
error 159 block N40
Programme shift requested on an axis for which homming is not completed
1 - Last known block number before the error
2 - Last good block
The error number, the block number with the error and possibly the error message text are displayed in the dialogue
window.
No block being executed
Only the line indicating the active programme is displayed.
To Next Page
Loading...
