NUM 1050 M - Display of Programme Variables and Equivalent Address Table

Display System Utilization
en-938821/2 4 - 37
4
4.9 Display of Programme Variables and Equivalent Address Table
4.9.1 Display of Programme Variables
Requirements
Basic softkeys displayed.
Actions
Select the "PROGRAMME VARIABLES" page. ☞
L / @
Display of the start of the list of programme variables:
GR1
PROGRAMME VARIABLES
L 0= +1856.5476 L 10= +0.
L 1= +0. L 11= +0.
L 2= +0. L 12= +0.
L 3= +0. L 13= +0.
L 4= +0.74964 L 14= +0.
L 5= +0. L 15= +0.5645237
L 6= +0. L 16= +63867.345
L 7= +0. L 17= +0.
L 8= +0. L 18= +0.
L 9= +0. L 19= +0.
Display the next page of the list of programme variables. ☞
. . / . .
DAT
Notes
In M02 status (no programme being executed), all the programme variables are reset to 0.