8 - 50 en-938821/2
8.9 Customisation of the System
The CNC as supplied was customised according to the initial option choices made by the customer.
This customisation has been carried out by NUM or by the OEM.
During the machine lifetime, it may happen that the customer requires extra functions corresponding to a different
customisation.
These functions may be supplied by NUM as a grid comprising various data to be entered into the system.
Example of customisation grid
JOB REFERENCE : XXXXXX 00
EEPROM SOFTWARE # : SIMU EEP
CNC SOFTWARE # : 202606C1
USER PLC SOFTWARE # :
PARAMETERS TABLE : F8
OPTIONS PRESENT:
COMM. DEV.
61250 11
61371 13
61501 42
61511 47
60
110
NUMBER OF CNC OR PLC AXES : 7
NUMBER OF SPINDLES : 2
NUMBER OF INTERPOLATED AXES : 5
NUMBER OF PLC ONLY AXES : 1
PART PROGRAM STORAGE : 768
PLC PROGRAM STORAGE : 256
GRID:
140000 210008 0 20000
0 0 0 0
KEY:
138467C5
DATE: 18 5 92
TIME: 9 15 0
IDENTIFICATION: CABE-EF
RESUME:
XXXXXX 00 / 140000 210008 0 20000 0 0 0 0
7 2 5 2 / 128 64 / CABE-EF / 138467C5
Requirements
"UTILITIES PRESENT" menu displayed (See 8.2.2).
Customisation grid available.
To Next Page
Loading...
