NUM 1050 M - Page 125

CNC Operation
en-938821/2 5 - 3
5
5.9.4 NUM Diskette Drive 5 - 81
5.9.4.1 Description of the NUM Diskette Drive 5 - 81
5.9.4.2 Syntax Rules and Control of the Drive 5 - 81
5.9.5 Operations on the NUM Diskette Drive 5 - 82
5.9.5.1 Drive Management 5 - 82
5.9.5.2 Diskette Management 5 - 83
5.9.5.3 Directory Management 5 - 84
5.9.5.4 File Management 5 - 87
5.9.6 Loading from the NUM Diskette Drive 5 - 92
5.9.6.1 Loading Part Programmes from the Num
Diskette Drive 5 - 92
5.9.6.2 Loading Tool Offsets from the NUM
Diskette Drive 5 - 94
5.9.7 Unloading to NUM Diskette Drive 5 - 96
5.9.7.1 Unloading the Active Programme to the
NUM Diskette Drive 5 - 96
5.9.7.2 Unloading Other Programmes to the NUM
Diskette Drive 5 - 98
5.9.7.3 Saving Tool Offsets to NUM Diskette
Drive 5 - 100