12 en-938821/2
CHAPTER 5
CNC
OPERATION
Description of machining preparation phases:
- axis jogs,
- machine-specific settings on the CNC,
- part programme processing.
Part programme automatic execution procedures.
Description of operator interventions during part machining.
Operations in background mode on part programmes.
CHAPTER 6
OPERATIONAL
PROBLEMS
Presentation of the incidents which occur most frequently on the CNC and flowcharts
indicating the most suitable action to be taken in each case.
CHAPTER 7
SYSTEM
FAULTS
Presentation of the system faults which can occur on power up and action to be taken.
CHAPTER 8
OPERATOR-
ACCESSIBLE
MAINTENANCE
Description of simple maintenance operations.
Presentation of user-accessible system management utilities.
To Next Page
Loading...
