5 - 64 en-938821/2
Aborting of the procedure
Stop the unloading procedure. ☞
The unload mode and "INCYC" indicators disappear and the current position page is displayed (See 4.2).
5.6.1.2 General Case of Part Programme Unloading
Requirements
Unloading from a peripheral Unloading from a computer
Link established with the peripheral Link established with the computer and
(See C.2) file name selected (See C.3)
Peripheral ready to receive data
(Seeperipheral manual)
"FILE UNLOADING" menu displayed on the screen and transmission line and character code selected (See 5.6).
Actions
Select "OTHER PROGRAMME". ☞
@
2
The cursor moves to the following line:
2 OTHER PROGRAMME
Start unloading. ☞
Display of the "INCYC" indicator in the status window (See 3.1.3).
Display on the dialogue line:
(%% OR %* OR %..) ❚
Select the programme(s) to be unloaded (See syntax below). ☞
Programmes to be unloaded Syntax
All programmes %%
Active programme %*
Programme %X.Y %X.Y
All programmes with prefix %X (%X.1, %X.2...) %X
The programme(s) is (are) unloaded to the peripheral for backup or printing.
Display of the programmes being unloaded.
When the unloading procedure has been completed, the "INCYC" indicator disappears and the "FILE UNLOADING"
menu is displayed.
REMARK When several programmes are unloaded in the same operation, they are archived
one after the other (without Xoff characters between).
To Next Page
Loading...
