5 - 76 en-938821/2
Unloading in progress
If you select "PROGRAMMES", the following message is displayed:
REFUSAL: Other function in progress
Wait for the end of the unloading procedure and then restart the procedure.
The "BACKGROUND LOAD" function cannot be accessed
Programmes cannot be loaded in background mode except in the authorised modes (See requirements).
Display of the message:
REFUSAL: Disallowed in this mode
Exit by selecting a display page.
Exit from the procedure
Exit without interrupting the loading procedure
Select a display page.
Loading continues in background while other CNC functions are being used.
Stop loading
Invoke the message prompt. ☞
Display of the message:
Abort: "9 ENTER" end of process
Exit the loading procedure. ☞
(
9
Return to the shortened version of the "FILE LOADING" menu.
Loading is interrupted, only programmes which have been completely loaded are stored.
To Next Page
Loading...
