8 - 2 en-938821/2
8.8.7 Unloading Programmes from a Protected
Zone and Checking Them 8 - 42
8.8.7.1 Unloading Protected Programmes for
Copy on Other Systems 8 - 43
8.8.7.2 Global Unloading of Protected
Programmes (Backup Copy) 8 - 44
8.8.7.3 Verification of Backed Up Programmes 8 - 46
8.8.8 Loading Programmes in Protected Area 8 - 47
8.9 Customisation of the System 8 - 50
8.9.1 Checking the Job Reference 8 - 52
8.9.2 Modification of the Number of Axes
and Spindles 8 - 53
8.9.3 Modification of the Memory Sizes 8 - 54
8.9.4 Modification of the Options Grid 8 - 55
8.9.5 Entering the Date and Identifier 8 - 57
8.9.6 Locking of the Customisation 8 - 58
8.9.7 Printout of Customisation 8 - 60
To Next Page
Loading...
