8 - 34 en-938821/2
If there is not enough memory in the protected zone for copying the programme(s)
Display of the message:
MEMORY ZONE FULL
If required, repeat the operation with a smaller programme.
REMARK The memory space can be increased by machine parameter P95 (See Parameter
Manual) before repeating the copy procedure.
A programme with the same number already exists in the protected area
Display of the message:
PROGRAMME ALREADY EXISTS
Continue if necessary with other programmes.
or
Delete the existing programme (See 8.8.5) before repeating the copy procedure.
The programme specified does not exist in area 0
Display of the message:
PROGRAMME DOES NOT EXIST
Continue if necessary with other programmes.
Exit from the procedure
Return to the "RESIDENT MACROS" menu. ☞
EXIT
To Next Page
Loading...
