8 - 38 en-938821/2
Display of the message:
END OF COPY
You can repeat the copy procedure for other programmes.
Incidents
Error in password
Display of the message:
INCORRECT PASSWORD
The "RESIDENT MACROS" menu is redisplayed after a few seconds.
Insufficient memory space in area 0 for copy of the programme
Display of the message:
MEMORY ZONE FULL
If required, repeat the operation with a smaller programme.
The programme to be copied is locked
Display of the message:
PROTECTED PROGRAMME
It is impossible to copy this programme to area 0
If required continue the operations with other programmes.
A programme with the same number already exists in area 0
Display of the message:
PROGRAMME ALREADY EXISTS
If required continue the operations with other programmes.
or
Delete the existing programme (See 5.4.2.3) and repeat the copy procedure.
The programme specified does not exist in the protected area
Display of the message:
PROGRAMME DOES NOT EXIST
If required continue the operations with other programmes.
Exit from the procedure
Return to the "RESIDENT MACROS" menu. ☞
EXIT
To Next Page
Loading...
