Ite
m
Interface Description
11 RTC Battery Battery holder for RTC
12 eMMC x8 NAND flash
OPN SuperNIC Component Side SuperNIC Print Side
FHHL Single-Slot Dual-Port DPUs
Model: B3220L
900-9D3B4-00CV-EA0
900-9D3B4-00SV-EA0
Model: B3210L
900-9D3B4-00CC-EA0
900-9D3B4-00SC-EA0
FHHL Single-Slot Single-Port DPUs
Model: B3140L
900-9D3B4-00EN-EA0
900-9D3B4-00PN-EA0
Ite
m
Interface Description
1 DPU SoC DPU SoC 8/16 Arm-Cores
2 Networking
Interface
The network traffic is transmitted through the DPU QSFP112 connectors. The QSFP112
connectors allow the use of modules and optical and passive cable interconnect
solutions
3 Networking
Ports LEDs
Interface
One bi-color I/O LEDs per port to indicate link and physical status
4 PCI Express
Interface
PCIe Gen 5.0/4.0 through an x16 edge connector
5 DDR5 SDRAM
On-Board
Memory
20 units of DDR5 SDRAM for a total of 32GB @ 5200 or 5600MT/s. 128bit + 16bit ECC,
solder-down memory
6 NC-SI
Management
Interface
NC-SI 20 pins BMC connectivity for remote management
7 USB 4-pin RA
Connector
Used for OS image loading
8 1GbE OOB
Management
Interface
1GbE BASE-T OOB management interface
To Next Page
Loading...
