Nvidia BlueField-3 - B3210 E Dpus Specifications

64
•
•
•
•
Humidity Operational 10% to 85% relative
humidity
Non-operational 10% to 90% relative
humidity
Altitude (Operational) 3050m
Regulatory
Safety CB / cTUVus / CE
EMC CE / FCC / VCCI / ICES / RCM
RoHS RoHS compliant
Regulatory Model Number D3B6
Notes:
(a)
The BlueField-3 DPU supplement the IBTA auto-negotiation specification to get better bit error
rates and longer cable reaches. This supplemental feature only initiates when connected to
another NVIDIA InfiniBand product.
(b)
The non-operational storage temperature specifications apply to the product without its
package.
8.7 B3210E DPUs Specifications
OPNs
900-9D3B6-00CC-EA0: Crypto Enabled with integrated BMC
900-9D3B6-00SC-EA0: Crypto Disabled with integrated BMC
BlueField-3 SoC
BlueField-3 E-Series - 16 Arm-Cores - 505MHz/2000MHz
Physical
Single-Slot FHHL Card Dimensions: 111.15mm x 167.65mm
Tall Bracket Dimensions: 121.0mm x 21.6mm
Heatsink Dimensions (Length, Width, Height): 139.6mm x 92.7mm x 10.2mm
Interfaces
See Supported Interfaces
PCI Express Interface Gen 5.0 SERDES @ 32.0GT/s, 16 lanes (4.0, 3.0, 2.0
and 1.1 compatible)
Optional: Additional PCIe x16 Gen 4.0/5.0 @ SERDES
32GT/s through the PCIe auxiliary passive card and
Cabline SA-II Plus harnesses
On-board Memory Dual-channel with 20 DDR5 + ECC (128bit + 16bit
ECC) for a total of 32GB@ 5200MT/s
40GB pSLC eMMC memory+ 128GB SSD
Networking Connector Dual-portQSFP112(copper and optical)
Data Rate
InfiniBand HDR100/EDR/FDR/SDR
Ethernet(Default Speed) 100/50/25/10 Gb/s
Protocol Support
InfiniBand: IBTA v1.5
(a)
Auto-Negotiation: HDR100 (2 lane x 50Gb/s per lane), EDR (25Gb/s per lane)
port, FDR (14.0625Gb/s per lane), 1X/2X/4X SDR (2.5Gb/s per lane).
Requires a supplementary 8-pin ATX power supply connectivity available through the
external power supply connector.